Camshaft Timing Oil Control Solenoid VVT Valve 24355-03011 i10 KIA Ceed CAMSHAFT

Description

The working principle of the camshaft position timing solenoid valve: it is used to control the automatic basic components of the fluid, which belongs to the actuator; Not limited to hydraulic, pneumatic.

Used to control the direction of hydraulic flow, the mechanical device of the factory is generally controlled by the hydraulic cylinder, so it will use its working principle, there is a closed chamber, in different positions open through holes, each hole leads to a different tubing, the middle of the chamber is the valve, both sides are two electromagnets, which side of the magnet coil energized valve body will be attracted to which side.

By controlling the movement of the valve body to stop or leak different oil discharge holes, and the oil inlet hole is usually open, the hydraulic oil will enter a different drainage pipe, and then through the pressure of the oil to push the oil just piston, the piston and drive the piston rod, the piston rod drives the mechanical device. In this way, mechanical motion is controlled by controlling the current of the electromagnet.

Send Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at info@zhparts.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Related Products